Input Module
KNX
6-Ch
Digital Input

Input Module-KNX

Part Number: LT-ACT-INP0600-KN-FLH01V1

Category: Input Module

  • Input can be configured for any type of Momentary Push Button, any standard Piano Switch and Door Contact, Presence Detector or any of the sensors.
  • Action for the Digital Input can be configured as Switching (ON, OFF and Toggle), Value Transmitter 1-byte and Scene.
  • Two different control objects for both states of Switch (ON and OFF) and both states of Sensors (NO and NC).
Share on whatsapp
Share on email
Share on facebook
Share on linkedin

Parameter

Description

Number of Inputs

6

Inputs per Common

3

Operation Voltage

+3.3 V DC in the common

Operation Current

1 mA @ 3.3 V DC (per input)

Switching Type

Dry voltage contacts between input and common

Connection Method

Pluggable screw terminal block

Cable Cross-Section

0.2-1.5mm² (IEC)/28-14AWG (UL)

Maximum Cable Length

3m

Voltage

30VDC SELV, KNX

Maximum Current Consumption

15mA

Connection Type

Typical TP1 bus connector for 0.80mm Ø rigid cable

External Power Supply

Not required

Operational Temperature

0°C .. +55°C

Storage Temperature

-20°C .. +55°C

Operation Humidity

5 .. 95% (Non-condensing)

Storage Humidity

5 .. 95% (Non-condensing)

Degree of Protection

IP20, clean environment

Installation

Flush mount

Housing Material

ABS

XYZ
XYZ
XYZ
XYZ
💿 Application Program ETS
🎴 PRODUCT IMAGES

Application

Description

Description of Application

×