Lebenor-Multi-Function Switching Actuator (Flush)

Multi-Function Switching Actuator (Flush)

Part Number: LT-ACT-MFN0600-KN-FLH01V1

Category: Actuator

Channels can be configured as individual switching channel. Channel 1 and 2 can be configured as curtain channel by pairing two channels.
Each channel relay is Normally Open.
ON delay and OFF delay for each of the channel.
Total Travel Time configuration for a Curtain Channel.

Dimming Channels can be configured as either Switching or as Switch + Dim channel.
Phase-cut dimming.
Configurable dimming speed for Switch-On and Cut-Off operations.
ON delay and OFF delay for each of the channel, if configured as Switching.

Channel can be configured as either Switching or as a Ceiling Fan speed control channel.
Supports 5 Speed Steps Fan Control.
Control of Fan using 1-bit, 1-byte or 4-bit object.
ON delay and OFF delay for channel, if configured as Switching.

Support 8 Scene for each individual channel or for pair of channels (if configured for curtain operation), each scenes support execution of any of the assigned KNX scenes (1-64).

📐 Technical Specification

Parameter	Description
Number of Switching Channels	3, 16A Latching Relay
Number of Dimmer Channels	2, Phase-Cut
Number of Fan Channels	1, 5 Speed Step Control
System Voltage	30VDC SELV, KNX
Typical consumption on KNX bus	15mA
Standby consumption on KNX bus	7.5mA
Maximum permissible current per channel (Relay Output)	16A
Maximum permissible current per channel (Dimmer Output)	60W (consider in-rush current of LED Driver)
Type of Load (Dimmer Output)	Dimmable LED Lights with Dimmable Driver @ 230V AC
Maximum permissible current (Fan Output)	500 mA
Type of Load (Fan Output)	90 W @230 V AC
Connection Type	Typical TP1 bus connector for 0.80mm Ø rigid cable
External power supply	230V AC
Operation temperature	-5°C … +45°C
Storage temperature	-20°C … +70°C
Installation	Flush Mounting
Housing material	ABS
Enclosure dimension (l x w x h)	115 x 60 x 30 mm
Cable cross-section	0.75-2.5mm²